for
The Roland DT-100 Digitizer Tablet is an accessory for the Roland sampler that is very rare. It is not really necessary to program sample sets but it could be funny to use the "wave drawing" function. The drawing tablet acts like a mouse and not like a graphic tablet you know from the computers: the digitizer tablet works relative and not absolute!!! So if you want to move to the right move the pen to the right. If you reach the tablet border just lift the pen and draw again from left to right!
On the S-330, S-550
and S-760 samplers you can't set the control to the DT-100 tablet as there
is no menu entry for it. And it doesn't work with any of the settings.
But you can use the DT-100 tablet when you route it through the RC-100
remote control!!!
(Thanks to Martin
Wulff from Germany for this information!)
Philips NMS-1150 Graphic Tablet:
While searching on
Ebay for some instruments to buy I found the Philips Graphic Tablet NMS-1150.
And have a look at the pictures - it seems that it is exactly the same
as the DT-100 Digitizer Tablet from Roland!!! (When you remember also the
Philips MSX-mouse looks like the Roland MU-1 mouse).
|
|
![]() |
![]() |
More information:
Philips
NMS-1150
Manual Front page |
dt100_nms1150_manual.jpg | |||||||||||||||||||||||||||||||||||||||||
Philips
NMS-1150
Specifications and Connector Pinout |
dt100_nms1150_specs.jpg | |||||||||||||||||||||||||||||||||||||||||
Graphic
Tablet connector
|
|
|||||||||||||||||||||||||||||||||||||||||
Graphic
Tablet protocol
|
unknown... If anybody can help me - please do! | |||||||||||||||||||||||||||||||||||||||||
Schematics
|
not available -
if you have the Dt-100 or Philips NMS-1150 schematics I would
be glad in getting a copy or scanned schematics! |
If you have a question
or just want to say your opinion about
my homepage don't
hesitate and contact me per email